Causes of Slippage of Screws

Causes of Slippage of screws

1. The length of the screw is not enough to bear the corresponding torque.

2. The strength and hardness of the screws are not enough to withstand the corresponding torque.

3. The force of screwing the screw exceeds the standard load of the screw, causing slippage.

4. The threaded holes or the threads of the threads are not standard, and the mutual connection is not tight enough.

5. The screw itself is not limited, and it will also cause the consequences of slippage.

6. The tooth outer diameter is too small. If the normal machine uses normal threads, the tooth outer diameter is too small, it will definitely cause the tooth to slip.